Sony Ericsson P910a User Manual page 44

This is the Internet version of the user's guide. © Print only for private use.
If a call is not successfully connected, the P910a can be set to
automatically retry to connect the call. When a retry is
successful, the P910a alerts you with a single ring signal.
To make a call using Speed
dial
Speed dial is a fast way to call
one of your special numbers.
See 'Set up speed dial
numbers' on page 48. This is
the default phone view.
1. Select on the button
bar.
2. Use the Jog Dial or tap with
the stylus to select an entry.
To make a call using the Call
list
1. Select from the button
bar.
2. Select an entry by rotating the Jog Dial and pressing it
inwards. You can also tap the entry using the stylus.
3. Select .
To make a call using the Contact list
1. Select in the application picker.
Phone Edit Chat Edit
Sony Ericsson Sony Ericsson
1 2 3
John Sandra Susan(w)
4 5 6
Mike Julia(h) Robert
7 8 9
Elizabeth Empty Empty
2. Select an entry by rotating the Jog Dial and pressing it
inwards.
3. Select a phone number by rotating the Jog Dial.
4. Press the Jog Dial inwards.
You can also tap the contact and/or number using the stylus.
To make a call using voice control
You use the voice control in the same way as with the flip
closed. See"To make a call using voice control" on page 41.
To end a call
Select , or press the Jog Dial.
End call
Incoming calls
When you receive a call, if the calling party is found in
Contacts, the name of the caller will be displayed. If there is a
picture, it will also be shown in a small or large version. See
'Incoming call picture' on page 52.
To handle an incoming call
Use the screen buttons to select what to do.
• – Answer the call.
Answer
• – Reject the call. The calling party will hear a busy
Send Busy
tone and the call will be logged as a rejected call.
Phone 44