Setting Number Formats; Setting Alarms - Sony Ericsson P910a User Manual

This is the Internet version of the user's guide. © Print only for private use.

Setting number formats

You can choose how you want the measurements and numbers
in your P910a to be displayed in all your applications. Distances
can be displayed using the imperial or the metric system and
different punctuation marks can be used as separators.
To set the number details
1. Select
> .
2. Select .
Time > Set location
3. Select .
Numbers
4. Choose separators and symbol positions from the drop-down
lists. You can tap the keyboard icon to find currency
symbols.
5. Tap .
Done

Setting alarms

You can set up to three different alarms in your P910a. You can
choose to activate one of the preset alarms, or set a new alarm
with your own definitions.
You can choose to set a silent alarm, where only a message is
displayed when it goes off, or you can set a sound alert.
Alarms requires that the P910a is turned on. If you want to get
alarms in an environment where radio transmitters are not
allowed, you can set the P910a to flight mode, see 'Flight mode'
on page 48.
Note If you have connected a stereo headset to the P910a, the
alarm will only be heard in the headset.
To activate an existing alarm
• Select the check box in the alarm slot.
the status bar on the screen.
To set a new alarm
1. Select .
>
2. Select one of the alarm slots.
3. Select and choose at what time you want the alarm to go
Time
off. Confirm by tapping outside the time picker.
4. Select and choose how often you want the alarm to go
When
off:
– The alarm will go off once only, at a time more than
Once
24 hours from now but within the next eight days.
– Within the next 24 hours.
Next 24 hours
– Every day at the specified time.
Daily
– Every workday at the specified time.
Workdays
– Every week at the specified time.
Weekly
5. Select and choose a sound.
Alarm sound
6. Select and choose a preset message or write a new
Message
one.
is displayed on
Time 120