Sony Ericsson P910a User Manual page 158

This is the Internet version of the user's guide. © Print only for private use.
GPRS Advanced tabs
is used by some network operators to
Authentication
identify the mobile phone connecting to their GPRS
network. There are different methods, or protocols,
for doing this.
: PAP (Password Authentication Protocol).
Normal
The user's username and password are transmitted
over the network in an unencrypted form.
: CHAP (Challenge Handshake
Secure
Authentication Protocol). The user's username and
password are never transmitted over the network.
None : No authentication is required by the network
operator.
QoS Check with your network operator before changing
any of the QoS (Quality of Service) settings.
The settings Precedence
rate are all by default set to
that your operators default QoS (Quality of Service)
values will apply.
default.
New Dial-Up or High-Speed Dial-Up account
Your Internet Service Provider (ISP) supplies you with your
, your , and their
name Password Phone number
dials to connect to the Internet. If you have a High-Speed Dial-
Up account with your network operator you can increase the
speed of your connection by making settings on the
under .
Advanced
158 Control panel
, Delay , Peak rate , and Mean
Subscribed , which means
Reliability is set as Class 3 by
User
, which your P910a
tab
Speed
Tip To avoid having to change the phone number when you
travel abroad: enter the international dialing prefix (for
example '+') and the appropriate country code for your ISP.
For some accounts you may also need to make advanced
settings.
Select and enter settings on the tabs as described
Advanced
below
Dial-Up and High-Speed Dial-Up Advanced tabs
Log in The settings on this tab deal with IP and DNS addresses.
For an explanation of these settings, see
'GPRS Advanced tabs' on page 157.
Script As an alternative to entering your username and password
to access the Internet you may need to use a login script
stored on your P910a. Although uncommon, scripts may
be required by your Internet Service Provider (ISP).
Select the
Use login script
text in the
Script editor
If you select the check box
(required by some ISPs), the security of your connection
will decrease during the connection process. Once you
are connected, the security of your connection will be
restored.
Log in in the
check box and enter the script
.
Plain text authentication