Motorola Premium Wireless Car Kit User Manual page 9

Microphone
The microphone cable can be routed along the side of the vehicle, through the
dash, and along the edge of the windshield. The microphone is placed best near
the rearview mirror and aimed directly toward the user.
User Interface Module
The User Interface Module (UIM) cable can be mounted in several ways to
provide a safe and comfortable environment for use.
Audio Connections
You can install the system's audio components in 2 ways:
External Speaker
If you are installing the system with the external speaker, you MUST leave the
audio output (+/-) lines disconnected. (See "Power Connections" on page 29.)
The external speaker should be connected to the interface cable.
Vehicle Radio
If you intend to use the vehicle radio to control audio level, you must connect the
audio output (+/-) lines to your vehicle's entertainment system.
Installing the Electronic Module
The best location for the electronic module is under the vehicle's dash. The box
must be protected from dirt and moisture and have adequate space for cooling
and to allow for cable connection.
For optimal Bluetooth® performance, mount the electronic module in a central
location within the vehicle. Do not place it behind or within large areas of metal.
The location of the electronic module MUST NOT interfere with deployment of the
vehicles air bags. Do NOT locate the electronic module in the vehicle's trunk
(boot).
Installing the Interface Cable
Caution: Failure to follow the steps below may cause the accessory not to work
properly and may cause damage to the car kit.
The interface cable has integral fuses on the power lines (VBatt and Ign).
7