Motorola Premium Wireless Car Kit User Manual page 10

Note: See "Power Connections" on page 29 for more information.
1 Connect the GREEN Ignition Sense wire to an ignition-switched location on the
fuse block. When the ignition is off, the ignition sense line is low.
2 Connect the YELLOW Entertainment Mute Wire to the vehicle's entertainment
system.
Note: This feature is only operational if the vehicle's radio supports this
capability. Installation may require an optional relay (not included).
3 Connect the RED positive battery lead to a point in the vehicle's fuse box that is
fused at 5 to 10 amp.
4 Connect the BLACK ground wire to the vehicle chassis.
5 Inspect all connections.
Note: The ORANGE and BLUE wires are not used. (These wires are used to
connect the line-level audio to the vehicle radio, if the radio supports this feature.)
Installing the Microphone
1 Attach 1 side of the VELCRO
the microphone.
2 Select a suitable mounting location and mount the
microphone:
• Locate the microphone no more than 16 inches (40 cm) from the driver.
• Aim the microphone directly toward the driver and away from direct air flow
from a vent.
• Do not allow anything (such as a rear-view mirror or sun visor) to block the
path between the microphone and the driver.
8
IHF1000
Module
32-pin
tape to the bottom side of
®
Interface
Cable
12-pin
2-pin
2-pin
User Interface Module
(UIM)
Speaker
Microphone
Radio
FUSES