Lochinvar EcoShield SHW35-245CE Installation, Commissioning & Maintenance Instructions page 21

FLUE CONNECTION DETAILS SHW35-245CE - SHW61-325CE
EXTENSION LENGTH SHW35-245 CE - SHW61-325 CE
To install the flue connection to the SHW35-245CE - SHW61-325CE water heaters the following procedure should be followed:
1. Insert the air intake transition into the intake connection reducer and tighten the worm drive clip.
2. Fit 80mm elbow (Item 3 in Table) to cut end of extension.
3. To the side (intake) connection of the concentric adaptor (Item 1 in Table), fit the other end of the 80mm dia. Extension.
4. Fit the bottom (flue) connection of the concentric adapter to the flue connection on the heater.
.
TRANSITION KIT SHW86-410CE, SHW116-410CE & SHW146-410CE
FLUE TRANSITION DETAILS SHW86-410CE - SHW146-410CE
FLUE CONNECTION DETAILS SHW86-410CE - SHW146-410CE
ITEM DESCRIPTION
1 CONCENTRIC ADAPTER
2 EXTENSION
3 ELBOW
MODEL
SHW35-245 NG CE
SHW46-325 NG CE
SHW61-325 NG CE
ITEM DESCRIPTION
1 CONCENTRIC ADAPTER
2 EXTENSION
3 ELBOW
MODEL
SHW86-410 NG CE
SHW116-410 NG CE
SHW146-410 NG CE
"X" DIMENSION
115mm
195mm
No cut required
"X" DIMENSION
135mm
No cut required
No cut required
21