Physical Components; Architecture - Xerox D Series Security Manual

Xerox® Security Guide for Light Production Mono Class Products

Physical Components

Xerox Legacy (4110/4112/4127) and D-Series® Copier/Printer products consist of an input document
handler and scanner, marking engine, controller, and user interface. Printer products do not have an
input document handler or scanner. A typical configuration is depicted below. Please note that options
including finishers, paper trays, document handers, etc. may vary configuration, however, they are not
relevant to security and are not discussed.
1. Optional High Capacity Feeder.
2. Bypass paper feed tray.
3. Duplex Automatic Document Feeder.
4. Document Cover.
5. Document Glass.
6. User Interface.
7. Optional Standard Finisher.

Architecture

Legacy (4110/4112/4127) and D-Series® Copier/Printer products share a common architecture which is
depicted below. The following sections describe components in detail.
8. Front Cover.
9. Left Cover.
10. Trays 1-4.
11. Lower Left Cover
12. Front Cover on Optional HCF.