Sony MXD-D1 Operating Instructions Manual page 8

Hooking up the system
Connecting the unit to an amplifier
Connect the amplifier to the LINE (ANALOG) IN/OUT jacks
using the audio connecting cords (supplied), making sure to
match the color-coded cords to the appropriate jacks on the
components: red (right) to red and white (left) to white. Be
sure to make connections firmly to prevent hum and noise.
MXD-D1
ç
LINE
(ANALOG)
IN OUT
L
R
Ç
ç ç ç ç ç : Signal flow
Connecting the unit to a digital component such as a
DAT deck, digital amplifier, or another MD deck
Connect the component through the DIGITAL OUT
OPTICAL connector with an optical cable (supplied). Take
the cap off the connector before plugging in the cable.
MXD-D1
DIGITAL OUT
OPTICAL
ç
ç ç : Signal flow
ç ç ç
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Note
Do not connect the AC power cord to a switched outlet.
Amplifier
TAPE (MD)
OUT IN
L
R
Digital component
DIGITAL
OPTICAL
IN OUT
Getting Started
5 EN