Sony MXD-D1 Operating Instructions Manual page 39

Editing Recorded MDs
Labeling tracks and MDs with the remote
Z
NAME
CHAR
0/)
1
Press NAME so that a flashing cursor appears in
the display, then do the following:
To label
A track
An MD
2
Select the character type as follows:
To select
Uppercase letters
Lowercase letters
Numbers
3
Enter one character at a time.
After you enter a character, the cursor shifts
rightwards and waits for the input of the next
character.
4
Repeat steps 2 and 3 until you have entered the
entire title.
If you entered the wrong character
Press 0 or ) until the character to be corrected
starts flashing.
Press CLEAR to erase the incorrect character, then enter
the correct one.
36 EN
6
Alphabet/number
buttons
CLEAR
NUM
· P p
= + r
0 )
Make sure that the player is
Playing, pausing, recording the track
to be labeled, or stopped after locating
the track to be labeled
Stopped with no track number
appearing in the display
Press
CHAR repeatedly until "Selected
ABC" appears in the display
CHAR repeatedly until "Selected
abc" appears in the display
NUM repeatedly until "Selected
123" appears in the display
5
Press NAME again.
The entered title appears on the left side of the
display after the label has been recorded.
To cancel labeling
Press p.
Changing an existing title
1
Press NAME so that a track title or disc title
appears in the display, then do the following:
To change Make sure that the player is
A track title Playing, pausing the track whose title
is to be changed, or stopped after
locating the track whose title is to be
changed
A disc title Stopped with no track number
appearing in the display
2
Keep pressing CLEAR (or EDIT/NO on the unit)
until the current title is erased.
3
Enter the new title.
Do steps 3 to 5 of "Labeling Recordings" on page
35, or steps 2 to 4 of "Labeling tracks and MDs
with the remote" on this page.
4
Press NAME.
Erasing all titles on a disc (Name Erase)
Use this function to erase all titles on an MD
simultaneously.
Note that once erased, titles cannot be recovered.
1
Press EDIT/NO repeatedly while the player is
stopped until "All Erase ?" appears in the display.
2
Press EDIT/NO again.
"Name Erase ?" appears in the display.
3
Press YES.
All titles are erased.
To cancel the Name Erase function
Press p.
z
You can erase all recorded tracks and titles
See "Erasing all tracks on an MD" on page 31.