Looping Part Of A Cd (Loop Play) - Sony MXD-D1 Operating Instructions Manual

Looping Part of a CD (Loop
g
Play)
With the loop function, you can repeat part of a CD
during playback. This lets you create original
recordings.
6
·
· P
= + r
1
Set CD/MD to CD.
2
Press LOOP repeatedly and choose either
NORMAL or RHYTHM.
See "The difference between NORMAL and
RHYTHM."
Each time you press LOOP, the display changes
as follows:
n
NORMAL 1 ----- NORMAL 5
RHYTHM 5 ----- RHYTHM 1
3
Press ·.
The player starts playing.
4
Keep pressing LOOP at the point you want to
repeat, and release LOOP when you want to stop
repeating.
You can also change the mode of the loop
(NORMAL 1 to 5, and RHYTHM 1 to 5), turning
AMS on the unit while pressing LOOP.
CD/MD switch
LOOP
p
n
The difference between NORMAL and
RHYTHM
The original track can be looped in two ways,
NORMAL and RHYTHM.
Original
Hey, Come on everybody! ...
In NORMAL mode
After repeating a particular portion, the normal play
starts from the point you started pressing LOOP.
Loop length
Hey, C... C... C... C'mon everybody!
Press LOOP
Release LOOP
In RHYTHM mode
After repeating a particular portion, the normal play
starts jumping over the period of the loop.
erybody! ...
Hey, C... C... C...
me on ev
Press LOOP Release LOOP
: Unheard portion overlapped by the loop.
You can choose the loop length from 1 (about
0.25 second) to 5 (about 1 second).
Playing CDs
...
15 EN