Honda CBF250NA Owner's Manual page 85

20180116165849_32K0AC000_eng_BOOK Page 84 Tuesday, January 16 2018 17:05:27 JST
Oil filter cover
Oil filter
cover bolts
Oil filter cover bolts
Install a new oil filter with its "OUT-SIDE"
7.
mark facing out.
Install the oil filter spring into the oil filter
8.
cover, and then install the oil filter cover
with a new gasket.
Install and tighten the oil filter cover bolts.
9.
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Gasket
"OUT-SIDE"
mark
Oil filter
Spring
Engine Oil Changing Engine Oil & Filter
u
Install a new sealing washer onto the
10.
drain bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
Fill the crankcase with the recommended
11.
oil ( P. 58, P. 130) and install the oil fill
2 2
cap.
Required oil
When changing oil & engine oil
filter:
1.5 L (1.6 US qt, 1.3 Imp qt)
When changing oil only:
1.4 L (1.5 US qt, 1.2 Imp qt)
Check the oil level. P. 78
12.
2
Check that there are no oil leaks.
13.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
81