Honda CBF250NA Owner's Manual page 114

20180116165849_32K0AC000_eng_BOOK Page 113 Tuesday, January 16 2018 17:05:27 JST
Tyre Puncture Removing Wheels
u
Remove the rear axle shaft, side collars,
5.
axle washer and rear wheel.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not push the brake pedal while the
u
brake caliper is removed.
110
Installation
Attach the right and left side collars in
1.
their original locations on the wheel.
To install the rear wheel, reverse the
2.
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.