Honda CBF250NA Owner's Manual page 84

20180116165849_32K0AC000_eng_BOOK Page 83 Tuesday, January 16 2018 17:05:27 JST
Engine Oil Changing Engine Oil & Filter
u
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
motorcycle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious
damage to the engine.
If the engine is cold, idle the engine for 3
1.
to 5 minutes.
Turn the ignition switch to the
2.
position and wait for 2 to 3 minutes.
Place your motorcycle on a firm, level
3.
surface.
Place a drain pan under the drain bolt.
4.
80
Remove the oil fill cap, drain bolt, and
5.
sealing washer to drain the oil.
Remove the oil filter cover, oil filter, spring
6.
and gasket by removing the oil filter cover
(Off)
bolts and let the remaining oil drain out.
Discard the oil and oil filter at an
u
approved recycling centre.
Sealing
washer
Drain bolt