Honda CBF250NA Owner's Manual page 115

20180116165849_32K0AC000_eng_BOOK Page 114 Tuesday, January 16 2018 17:05:27 JST
Make sure that the lug on the brake
3.
caliper bracket is positioned in the slot on
the swingarm.
Brake caliper bracket
4.
5.
Torque: 88 N·m (9.0 kgf·m, 65 lbf·ft)
6.
7.
Lug Slot
Swingarm
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tyre Puncture
u
Adjust the drive chain slack.
Install and tighten the rear axle nut.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
Removing Wheels
P. 89
2
111