Honda CBF250NA Owner's Manual page 111

20180116165849_32K0AC000_eng_BOOK Page 110 Tuesday, January 16 2018 17:05:27 JST
Remove the front axle nut, front axle
6.
shaft, front wheel and side collars.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not pull the brake lever while the
u
front wheel is removed.
Axle pinch bolt
Installation
1.
2.
Side collar
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
3.
Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft)
4.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
Front axle shaft
Tyre Puncture
u
Attach the side collars to the front wheel.
Position the front wheel between the fork
legs and insert the front axle shaft from
the left side, through the left fork leg and
wheel hub.
Install and tighten the front axle nut.
Tighten the axle pinch bolt on both sides.
Removing Wheels
Continued 107