Event And Fault Logs; Edit Inverter List - YASKAWA SOLECTRIA XGI 1500 Series Installation And Operation Manual

Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
5.12

Event and Fault Logs

This screen allows a user in Administrator mode to view the event and fault logs.
5.13

Edit Inverter List

This screen allows a user in Administrator mode to add or remove inverters from the network. A new inverter
must be detected in order to add it to the network.
In Figure 5-37 there are three inverters with network issues. If the inverter with IP Address 10.25.187.89 is no
longer part of the network, it can be removed. If inverters are detected on the network but are not added to the
cluster, click the Add button to add them to the cluster.
Figure 5-36 Events and Fault Logs
Figure 5-37 Edit Inverter List
55 of 77