Remote Combiner (Optional) - YASKAWA SOLECTRIA XGI 1500 Series Installation And Operation Manual

Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
9.2

Remote Combiner (Optional)

Yaskawa Solectria Solar also offers a Remote Combiner (CR-XGI1500 series) that is exclusively compatible
with the XGI 1500. The Remote Combiner is intended to be installed in the vicinity of the PV array and is
typically used when the inverters are clustered in a "virtual central" type PV system architecture. See Table 9-2
below for the specifications of the CR-XGI1500 series combiners.
DC SWITCH &
SURGE PROTECTION
(CERTAIN MODELS
ONLY)
Table 9-2 Remote Combiner Box Specifications
REMOTE COMBINER
CR-XGI1500 Series
PV Source Circuit Input Wire Compatibility
PV Ourput Circuit Wire Compatibility
Maximum Voltage
Fuse Rating Options
Fused Positions
Fuse Configuration
Input PV Source Circuit Configuration
Temperature Range
Mounting Orientations
Safety Certification & Listing / Certification Agency
Standard Warranty
Overall Dimensions
Enclosure Material, Weight and Rating
Surge Protection (Specific Models Only)
Figure 9-4 SOLECTRIA XGI 1500 Remote Combiner Box
1500V STRING COMBINERS
EXCLUSIVELY FOR USE WITH XGI1500 INVERTERS
Compression Terminal: 1 conductor, 1/0 - 500 kcmil
2 conductors, 1/0 - 500 kcmil
15A or 20A (fuses included)
16 / 20 / 24 / 26 / 28
Both Positive and Negative Polarities Fused
Ungrounded PV Source Circuits Only
2-Pole DC Disconnect, Integrated
DC Disconnect
Positive and Negative Poles Switched, 250A
-40°F to 122°F (-40C to +50C)
Vertical, Horizontal or Angled
Height: 29.5 in. (750 mm) | Width: 18.1 in. (460 mm)
Depth: 11 in. (280 mm)
Polyester Powder Coated Aluminum
85 lbs (38.6 kg), NEMA Type 4X
Both positive and negative polarities
18.1 in.
(460mm)
14 - 4 AWG
1500 VDC
25A 30A
20 16
UL 1741 / Intertek
5 Years
29.5 in.
(750mm)
11 in.
(280mm)
75 of 77