Temporarily Insert The Downdraft Into The Cabinet - Fisher & Paykel HD30 Installation Instructions Manual

Hide thumbs Also See for HD30:

Table of Contents

3. Temporarily Insert the Downdraft into the Cabinet

• With the assistance of another person, lift the downdraft unit into the prepared cutout in the cabinet. The over

counter mounting brackets should rest on the countertop.

• Secure the downdraft unit to the countertop with two 19/32" (15 mm) screws.

• Install the under counter mounting brackets underneath the countertop for additional support. First, loosely

screw the brackets into the sliding nuts in the downdraft unit using 3/16" (5 mm) screws and push them up under

the countertop. Pre-drill the mounting holes into the countertop from underneath. Check that the mounting

screws are the proper length and will not extend through the countertop surface when tightened Fig.5.

https://producthelp.fisherpaykel.com/us/Cook/Ventilation/Downdraft/HD36/User_Guide_HD36/05_installation_instructions

Fig.3

Fig.1

Fig.4

Updated: Fri, 28 Jun 2019 03:30:59 GMT

Table of Contents

Hd36