Table of Contents
Advertisement
Self-Diagnosis
IF Board
*IF Diagnosis*
POWER
LSI Condition
Active
RET
A-RET1
AUX
AUX
PORMPT PORMPT
POWER: Operational status of the board regulator
LSI Condition: Setting status of the LSI
Active: Existence of an active input route
RET: Active RET signal route
AUX: Active AUX signal route
PROMPT: Active PROMPTER signal route
VPR Board
*VPR Diagnosis*x1
POWER
LSI Condition
Frame Interpolation
DISC Mode
POWER: Operational status of the board regulator
LSI Condition: Setting status of the LSI
Frame Interpolation: Setting status of output picture
composition on the VPR board
DISC Mode: Setting status of output format of the SS-
A/SS-B/SS-C connectors
This display does not appear if no VPR-57 board is
installed.
A maximum of 3 pages of self-diagnosis, depending
on the number of boards installed is displayed for the
boards not supplied.
26
OK
OK
IN
IN
OK
OK
REMOTE:OFF
MAV
DIF Board
*DIF Diagnosis*
POWER
LSI Condition
SS-A
OUT
SS-B
OUT
SS-C
OUT
POWER: Operational status of the board regulator
LSI Condition: Setting status of LSI
SS-A OUT: Output status of SDI-A signal
SS-B OUT: Output statusn of SDI-B signal
SS-C OUT: Output status of SDI-C signal
This display does not appear if no DIF-38 board is
installed.
CAMERA Diagnosis
*CAMERA Diagnosis*
ALL OK
The board DIAG display transmitted by the DIAG
command is displayed as is.
ROM Version
*ROM Version*
CAM 1.01
1999.09.10
CCU 1.01
1999.09.10
RCP 1.01
1999.09.10
CAM: Displays the ROM version of the camera head
CCU: Displays the ROM version of CCU
RCP: Displays the ROM version of RCP
OK
OK
OK
OK
OK
Advertisement
Table of Contents
