Table of Contents
Advertisement
6 CHARACTER OUTPUT (character signal
output) connector (BNC-type)
Used to output the results of the CCU-900/900P
diagnostic self-test and menu display in black-and-
white analog video format.
7 DIGITAL AUDIO (digital audio signal output)
connector (BNC-type)
Used to output a digital audio signal input to the
camera, or for output of the microphone signal
converted to an AES/EBU-format digital audio signal.
8 AUDIO OUTPUT (audio signal output)
connectors (XLR 3-pin)
Used to output the microphone signal or audio signal
input to the video camera.
9 INCOME REMOTE (intercom remote)
connector (D-sub 25-pin)
Enables remote operation such as muting the intercom,
break-in from the producer or from engineers by
sending signals through this connector from external
control equipments.
Outputs red tally signal, green tally signal, tally call
signal, and camera number signal.
For information on installation, contact a Sony service
representative.
0 INTERCOM/TALLY/PGM (program)
connector (D-sub 25-pin)
Used for input and output of intercom, tally, and
program audio signals. Connect the cable from the
intercom/tally/program connector of the intercom
system.
For information on using with an RTS intercom system,
contact a Sony service representative.
13
Advertisement
Table of Contents
