Sony CCU-900 Operation Manual page 12

Hide thumbs Also See for CCU-900:
Table of Contents

Advertisement

Location and Function of Parts
2 SDI signal input/output connectors
1
2
SERIAL RET INPUT
A SERIAL RET INPUT 1 to 4 (SDI return video 1,
2, 3, and 4 input) connectors (BNC-type)
Four SDI return video signals are received
independently. The selection of RET 1, 2, 3, or 4 is
made using the return video switch on the camera.
The signals assigned to RET 1, 2, 3, and 4 are selected
using the setup menu of the CCU-900/900P, or using
the MSU-700A/750 Master Setup Unit, from among
the SDI, analog, SDI AUX, and PROMPTER.
B AUX IN (auxiliary input) connector (BNC-type)
For inputting an SDI video signal.
The input signal is output via the AUX OUT
connector. It is also possible to assign the signal to
RET 1, 2, 3, and 4 using the setup menu of the CCU-
900/900P.
For dual camera operation, the primary and secondary
CCUs are connected using the AUX IN/OUT
connectors mutually.
C AUX OUT (auxiliary output) connector (BNC-
type)
Outputs the signal that is input via the AUX IN
connector.
D REFERENCE IN (reference input) connectors
(BNC-type)
Used to input a reference signal (sync or VS signal) for
an external sync operation. Terminate the unused
10
A SERIAL RET INPUT 1 to 4 connectors
B AUX IN connector
C AUX OUT connector
3
4
IN
OUT
AUX
D REFERENCE IN connectors
E SERIAL OUTPUT 1 to 3 connectors
1
2
REFERENCE IN
SERIAL OUTPUT
connector with a 75-ohm terminator.
E SERIAL OUTPUT 1 to 3 connectors (BNC-type)
The signal from the video camera is output as three
SDI signals.
If the BKP-9330 is installed, mixed signal of triple-
speed signals sent from the BVP-9500WS/9500WSP
are output through these connectors. Mixing is set to
ON or OFF with the VPR-57 board of this unit or the
MSU-700A/750 Master Setup Unit.
F SERIAL OUTPUT MONI (SDI monitor output)
connector (BNC-type)
The signal from the video camera mixed with the
character signal, skin-tone gate signal, and 4:3 marker
signal is output as an SDI signal.
Mixing is set to ON or OFF with the RCP-700 series or
MSU-700A/750 Master Setup Unit.
F SERIAL OUTPUT MONI
connector
3
MONI

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ccu-900pBkp-9330

Table of Contents