The Service Profiler Id (Spid); Power Failure Operation; Fcc Registration; Hearing Aid Compatible - AT&T Callmaster Series Reference Manual

ISDN 8528T Voice Terminal

The Service Profiler ID (SPID)

When ISDN terminals are initially installed, a unique SPID number must be entered into the ter-
minal. This number identifies the terminal to the network. Usually, the system manager provides
the SPID for each terminal in the system. Use the following procedure for entering the SPID in
an ISDN 8528T terminal.
1. Press and then press
Menu
2. Dial the numbers, ''43'' (ID).
3. Press on the dial pad.
*
4. Enter digits from the dial pad for a new SPID number. If, at any point, you make a mis-
take, press
*
5. When the SPID number is correct, press
the terminal.

Power Failure Operation

The 8528T cannot be used as an emergency station during power failure transfer conditions.

FCC Registration

The 8528T voice terminal is FCC registered as a Class A terminal.

Hearing Aid Compatible

This terminal is compatible with the inductively coupled hearing aids as required by the FCC.

8528T Equipment PECs and COMCODES

The 8528T voice terminal and optional components can be ordered with the following Price Ele-
ment Codes (PECs) and COMCODES:
ISDN 8528T Voice Terminal
PEC: 3xxx-001 (AT&T Black=COL09; AT&T White=COL10)
COMCODE: AT&T Black=107344509; AT&T White=107344517
3-454
.
Mute
to erase the number and re-enter the SPID.
on the dial pad to save the new SPID in
#