Applications; Physical Description - AT&T Callmaster Series Reference Manual

7103A Programmable Voice Terminal
The 7103 Programmable voice terminal is a single-line analog model no longer manufactured.
However, some remanufactured terminals may still be ordered. The 10 feature buttons can be
programmed by the user for one-touch feature access or for one-touch Speed Dialing. It requires
one tip and ring pair for operation. It cannot be physically bridged to the same analog line port
due to the message waiting and loop current circuitry.

Applications

The 7103A voice terminal can be used with the DEFINITY G1, G2, G3, System 75, and System
85. This voice terminal is especially suitable for groups of office workers who make frequent calls
to the same destinations or use the same features.

Physical Description

Dimensions
Note: The following dimensions are approximate.
Width = 7 inches
Depth (front to back) = 8-3/4 inches
Height (maximum with handset in place) = 5-1/2 inches
Thickness of housing = 1-1/2 inches
Features
Four Fixed Feature Buttons
RECALL button
DISCONNECT button
LAST NUMBER/WAIT button —dual function button: In its normal (Last Number) mode,
this button is used to automatically redial the last number dialed; in the Wait mode, it is
used to enter a delay in a number being stored on a feature button.
7103A Programmable Voice Terminal
3-41