Table of Contents
Advertisement
Chapter 6. ETHERNET-BASED
6.1
Introduction
Ethernet‐based Remote Product Management is available through the CDM‐750 rear panel 'J4 |
MGMT' RJ‐45 10/100 BaseT Fast Ethernet M&C port.
1. TO PROCEED WITH ETHERNET‐BASED REMOTE PRODUCT MANAGEMENT (SNMP
OR WEB SERVER), ASSUMPTIONS ARE MADE THAT:
•
•
•
2. USE OF THE ETHERNET‐BASED SNMP INTERFACE IS RECOMMENDED ONLY FOR
ADVANCED USERS. ALL OTHER USERS ARE STRONGLY ENCOURAGED TO USE THE
CDM‐750 WEB SERVER INTERFACE FOR MONITOR AND CONTROL (M&C) OF THE
CDM‐750.
REMOTE PRODUCT
The CDM‐750 is operating with the latest version firmware files.
The CDM‐750 is connected to a user‐supplied, Windows‐based PC, and:
o The PC serial port is connected to the CDM‐750 rear panel 'J3 |
REMOTE' port with a user‐supplied serial cable.
o The PC Ethernet port is connected to the CDM‐750 rear panel 'J4 |
MGMT' 10/100 BaseT Ethernet port with a user‐supplied hub, switch, or
direct Ethernet cable connection.
o The user PC is running a terminal emulation program (for operation of
the CDM‐750 Serial Interface) and a compatible Web browser (for
operation of the CDM‐750 Web Server Interface).
The CDM‐750 Management IP Address has been noted using the CDM‐750
Serial Interface.
MANAGEMENT
6–1
Advertisement
Table of Contents
