Removing The Rear Fairing - APRILIA RSV mille Workshop Manual

CHASSIS

7.1.38 REMOVING THE REAR FAIRING

Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
a
CAUTION
Wait until the engine and the exhaust silencer have
completely cooled down.
N
Put back the rider saddle, see 7.1.1 (REMOVING THE
RIDER SADDLE).
N
Remove the rear fairing rear end, see 7.1.36 (REMOV-
ING THE REAR FAIRING REAR END).
~ Unscrew and remove the passenger grab strap fas-
tening screw (1).
Screw (1) driving torque: 10 Nm (1.0 kgm).
N
Retrieve the grab strap (2).
N
Unscrew and remove the two front fastening screws
(3).
Screws (3) driving torque: 2 Nm (0.2 kgm).
~ Unscrew and remove the two lower fastening screws
(4).
Screws (4) driving torque: 2 Nm (0.2 kgm).
a
CAUTION
Handle the plastic and painted components with care
to avoid scraping or damaging them.
N
Prise the front part of the rear fairing (5) slightly apart
and slide it off the back.
7 - 30
- 00
RSV mille
Release 00/2002-10