REMOVING
THE INSPECTION COVER
Carefully read p. 35 (MAINTENANCE).
Handle the painted components
with care and avoid scraping or
damaging them.
◆
Position the vehicle on the centre stand.
◆
Unscrew and remove the screw (1).
◆
Lift the front part of the inspection cover
(2) and remove it by withdrawing it in the
travelling direction.
Upon reassembly, correctly in-
sert the two side tangs in their
seats.
52
use and maintenance Sonic 50
REMOVING THE FRONT COVER OF
THE REAR PART OF THE FAIRING
Carefully read p. 35 (MAINTENANCE).
Handle the plastic and painted
components with care and avoid
scraping or damaging them.
◆
Position the vehicle on the centre stand.
◆
Lift the saddle, see p. 19 (UNLOCK-
ING/LOCKING THE SADDLE).
◆ ★
Unscrew and remove the two upper
screws (3).
◆ ★
Unscrew and remove the side screw
(4).
The front cover of the rear part of
the fairing can be removed (and
put back) only with lowered saddle.
Before lowering and locking the
saddle, make sure that you have
n o t l e f t t h e k e y i n t h e c r a s h - h e l -
met/glove compartment.
◆
Lower the saddle.
◆
Remove the front cover of the rear part
of the fairing (5) by withdrawing it in the
travelling direction.