SPRING UPPER SEAT
REMOVAL
1) Removal coil spring. Refer to "COIL SPRING" in this section.
2) Remove spring upper seat (1).
INSTALLATION
1) Install spring upper seat (1).
NOTE:
For proper installing direction of spring upper seat (1),
refer to the figure.
A : Vehicle body side (Upper side)
2) Install coil spring. Refer to "COIL SPRING" in this section.
TRAILING ARM
REMOVAL
1) Hoist vehicle and remove rear wheel.
2) Support rear axle (1) (2WD vehicle) or rear axle housing
(4WD vehicle) using floor jack (2).
CAUTION:
Never apply floor jack against lateral rod as it may get
deformed.
3) Remove lateral rod right side bolt (1) and nut (2).
REAR SUSPENSION 3E-11