Table of Contents
Advertisement
5) Remove strut support nuts (1).
NOTE:
Hold strut by hand so that it will not fall off.
6) Remove strut assembly.
DISASSEMBLY
1) Using a spring compressor (1), compress the strut spring (2)
till its force pressing the spring seat (3) is released.
WARNING:
Use a commercially available spring compressor (1) and
follow the operation procedure described in the Instruc-
tion Manual supplied with that spring compressor (1).
2) Remove strut nut with special tools while coil spring is com-
pressed.
Special tool
(A) : 09900-00411
(B) : 09900-00414
(C) : 09945-26010
3) Disassemble strut assembly.
ASSEMBLY
For assembly, reverse disassembly procedure, noting the follow-
ing instructions.
• Mate spring end with stepped part (3) of spring lower seat (2)
as shown.
• Install spring upper seat (1), mating stepped part (4) of seat
with spring upper end (5) as shown.
FRONT SUSPENSION 3D-7
Advertisement
Table of Contents
