Sony 5500 Operation Manual page 157

Item number Item
622 CHARACTER H-
POSITION
623 CHARACTER V-
POSITION
624 CHARACTER TYPE without BG
625 CHARACTER SIZE
626 DISPLAY
INFORMATION
select
627 CHAR WARNING
DISPLAY at dual
line mode
Setting Function
0 Sets the horizontal position of text information
superimposed on the signal output from the MONITOR
connector of SD SDI OUT, the SD OUT COMPOSITE
[8]
connector and HD SDI OUTPUT connector. A setting of 0
displays the information at the left edge of the screen, and
15
the position moves to the right as the setting is increased.
There are 16 possible settings, from 0 to 15.
0 Sets the vertical position of text information superimposed
on the signal output from the MONITOR connector of SD
SDI OUT, the SD OUT COMPOSITE connector and HD
[22]
SDI OUTPUT connector. A setting of 0 displays the
23
information at the bottom of the screen, and the position
moves up as the setting is increased. There are 24 possible
settings, from 0 to 23.
Note
If two-line display is selected in item 626, sometimes the
second line will disappear in the middle of the screen.
Sets the style of text information such as time codes output
outlined from the MONITOR connector of SD SDI OUT, the SD OUT
translucent COMPOSITE connector and HD SDI OUTPUT connector.
[with BG]
without BG: White characters, with no background.
outlined: White characters outlined in black.
translucent: White characters on a gray screen
with BG: White characters on a black background.
Note
For the SD SDI OUT connector and SD OUT COMPOSITE
(MONITOR) connector, the "translucent" setting is
automatically changed to "with BG".
× 1
Sets the size of text information such as time codes output
from the MONITOR of SD SDI OUT, the SD OUT
×
[ 2]
COMPOSITE connector and HD SDI OUTPUT connectors.
× 1: Normal size.
× 2: Twice normal size.
time data & status When item 620 is set to "on", this setting specifies the
time data & UB content of text information output from the MONITOR
time data & CTL connector of SD SDI OUT, the SD OUT COMPOSITE
time data & VITC connector and FORMAT CONV. OUT (OPTION) connector.
[time data only]
time data & status: Timer counter display and status
time data & UB: Timer counter display and user bits.
time data & CTL: Timer counter display and CTL.
time data & VITC: Timer counter display and VITC.
time data only: Timer counter display only.
[off]
When item 626 is set to anything other than "time data
on only", this item specifies whether warning messages flash
on the second line or not.
off: Warning messages do not flash.
on: If a warning message exists, it flashes.
Notes
• Messages that have been cleared are not displayed.
• When there are multiple warning messages, each
background.
information.
For more information about clearing warning messages,
see "Clearing warning messages" on page 138.
message flashes twice before it is replaced by the next
message.
157
Menu List