Setting The Clock Automatically - Sony XR-C900RDS Operating Instructions Manual

1
Press (LIST) during FM reception until
"PTY" appears.
PTY
INFO
EQ SUR
The current programme type name appears
if the station is transmitting the PTY data.
"- - - - -" appears if the received station is
not an RDS station, or if the RDS data has
not been received.
2
Press (LIST) repeatedly until the desired
programme type appears.
The programme types appear in the order
shown in the above table. Note that you
cannot select "NONE" (Not specified) for
searching.
PTY
SPORT
EQ SUR
3
Press either side of (SEEK/AMS).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds.
"NO" and the programme type flash for
five seconds if the unit cannot find the
programme type. It then returns to the
previous station.
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until "CT" appears.
Set up
CT off
EQ SUR
2
Press (4) (n) repeatedly until "CT on"
appears.
The clock is set.
Set up
CT on
EQ SUR
3
Press (SHIFT) to return to the normal
display.
To cancel the CT function
Select "CT off" in step 2 above.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by the
CT function and the actual time.
EN
13