Other Functions; Using The Rotary Remote - Sony XR-C900RDS Operating Instructions Manual

Other Functions

Using the rotary remote

The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD or MD
changer with the rotary remote.
By pressing the button
(the SOURCE button)
(SOURCE)
EN
Each time you press (SOURCE), the
source changes as follows:
FM1 n FM2 n MW n LW (SW) n CD1 n
CD2 n MD1 n MD2 n TAPE
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
•Locate the beginning of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
•Locate a specific track on a disc. Rotate
and hold the control to locate the specific
point in a track, then release it to start
playback.
14
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
By rotating the control while
pushing (the PRESET/DISC control)
Rotate the control while pushing it to:
•Receive the stations memorised on the
preset buttons.
•Change the disc.
Other operations
Rotate the VOL control to
adjust the volume.
Press (DSPL) to change the
displayed items.
Press (LIST) to display
memorised names.
Changing the operative direction
The operative direction of controls is factory
preset as in the illustration below.
To increase
To decrease
Press (MUTE) to
mute the sound.
Press (OFF) to
turn off the
unit.
Press (SOUND)
to adjust the
volume and
sound menu.