Setting The Clock Automatically; Other Functions; Using The Rotary Commander - Sony XR-C7200R Operating Instructions Manual

Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until "CT" appears.
S e t
SUR EQ
SET UP
2
Press (4) (n) repeatedly until "CT on"
appears.
The clock is set.
S e t
SUR EQ
SET UP
3
Press (SHIFT) to return to the normal
display.
EN
To cancel the CT function
Select "CT off" in step 2 above.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by the
CT function and the actual time.
12
CT off
CT on

Other Functions

Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can control the optional CD and MD unit
with the rotary commander.
By pressing the button
(the SOURCE button)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
Tuner n CD n MD n Tape
Pressing (MODE) changes the operation in
the following ways
• the tape transport direction
• the band: FM1 n FM2 n MW n LW
• the CD unit: CD1 n CD2 n ....
• the MD unit: MD1 n MD2 n ....
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary commander.
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
• Locate the beginnings of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
(MODE)