Honeywell Accenta Engineer's Manual page 27

Accenta/Optima Engineer's Manual
Flag 2
NOTE: Pressing the [9] key sets all flags ON. Pressing the [0] key sets all flags OFF. Pressing the
leaves the function.
LCD Keypad:
• Press [2] to select System Flag 2. Press [1-2]
or to toggle flag on or off.
• Press or [2] to go to second option of Flag 2.
• Press to save changes and then
leave menu or press
LED Keypad:
• Press [2] to select of System Flag 2. Press [1-2] to toggle
flag ON or OFF.
• Press [1] and [2] to enable the first and second option of
Flag 2.
• Press to save changes and then
menu or press
Flag 2 - Options
Single Key Set
When this flag is set to ON, it allows the panel to be set by pressing
However, a 4-digit code is required to Unset the panel. Pressing [1] toggles the flag ON or OFF.
Strobe on Set
When this flag is set to ON, the external strobe will stay on for five seconds once the panel has set. Pressing
[2] toggles the flag ON or OFF.
Flag 3
Flag 3 shows the Software Version of the panel and may be requested when contacting technical support.
Use the up arrow to scroll through the screens.
LCD keypad only: Example information you may see:
System and
software version
Accenta Optima
Version 1.00
to
twice to leave the menu.
to leave
twice to leave the menu.
Part No English
for software
Version
F130-01-101
System Flags (contd)
Single Key Set
Yes
Strobe on Set
NO
System Flags
. A code entry is not required.
Build
Build 101 (01)R
Date May 05 2006
23
key
[2]
or [2]
then
[2] then [1-2]
1 2 3 4 5 6 7
[1-2]
3 4 5 6 7
1 2
then
4
1 2 3 5 6 7
Build
8
8
8