Table of Contents
Advertisement
Getting Started
Using the Rotary Remote
You can use the rotary remote for all operations
except menu operations.
Basic Operations
SOURCE button
VOL/DISC/PRESET control
18
Getting Started
Press the button.
The system turns on. Each time you press the button, the
program source switches as follows: CD n MD (only
when an MD changer is connected) n AUX (only when
AUX settings have been done: see page 49) n FM1n
FM2 n AM n CD. When an external component is
selected, it will be indicated as an auxiliary (AUX)
component.
To turn off the system, press the OFF button on the side of
the rotary remote (see page 19).
Rotate the control.
You can adjust the volume.
Push in and rotate the control.
You can change the disc inside of the changer when CD or
MD is selected.
You can change the preset station in the tuner when FM1,
FM2, or AM is selected.
Push in and release the control.
The display section shows the list of discs or preset
stations for a few seconds, then reverts to the previous
display.
Advertisement
Table of Contents
