Using Optional Equipment; Auxiliary Audio Equipment; Rotary Commander Rm-X4S - Sony MEX-BT3600U Operating Instructions Manual

LOUD (Loudness)
To allow you to listen clearly at low volume
levels.
– "LOUD-ON": to reinforce bass and treble.
– "LOUD-OFF" ( ): to not reinforce bass and
z
treble.
DM+* 3
To set the DM+ function.
– "DM+-ON" ( ): to activate it.
z
– "DM+-OFF": to cancel it.
BTM (page 12)
BT INIT*
1 (page 17)
*1 When the unit is turned off.
*2 When the black out function is activated, the unit
cannot be operated with the card remote
commander.
*3 When CD/USB source is activated.
*4 When FM is received.

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
AUX
AUX
Connecting cord*
(not supplied)
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE) repeatedly until "AUX"
appears.
"AUX FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press the select button repeatedly until "AUX"
appears, and rotate the control dial to adjust
the input level (–8 dB to +18 dB).

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SE L
M O D E
D SP L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
SEL
PRESET/
DISC
SOURCE
VOL
SEEK/AMS
The following controls on the rotary commander
require a different operation from the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• SEL (select) button
The same as the select button on the unit.
During the Quick-BrowZer mode, (SEL)
(select) is inactive.
continue to next page t
D S P L
M O D E
S E L
ATT
MODE
DSPL
OFF
19