Removing The Motorcycle From The Lift Stand; Removing The Seat; Mounting The Seat; Mount And Tighten Screw - KTM 85 SX 2018 Setup Instructions

3.1

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
1 0 0 1
3.2

Removing the seat

3.3

Mounting the seat

–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
side of the wheel spindle.
Info
Remove the plug-in stand before riding.
402001-10
–
Remove screw
–
Raise the rear of the seat, pull the seat back, and lift it off.
V00836-10
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
V00837-01
–

Mount and tighten screw

Guideline
Remaining screws,
chassis
V00836-10
1
.
1
of the seat fixing.
M6 10 Nm (7.4 lbf ft)
3 WORK
1
into the left
7