2 SETUP
4
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount and tighten the screws
evenly.
Guideline
V01041-01
Screw, handlebar
clamp
Info
The markings on the handlebar should be at the center
of the handlebar clamps.
Keep the gap widths equal when tightening.
–
Position the handlebar cushion and secure with cable ties.
V01042-01
–
Attach the start number plate to the brake line.
V01043-01
–
Position the start number plate.
The holding lugs engage in the fender.
–
Mount and tighten screw
Guideline
Start number plate
screw
–
Remove the fuel tank. (
V01044-10
M8
20 Nm (14.8 lbf ft)
3
.
M6
4 Nm (3 lbf ft)
p. 8)