Vapour Clean (On Some Models Only) - Smeg SFA562X2 Original Instructions Manual

Hide thumbs Also See for SFA562X2:
Table of Contents

Advertisement

Cleaning the top of the oven cavity (on
some models only - not on pyrolytic
models)
High temperature inside the oven
during use
Danger of burns
• The following must only be carried out
when the oven is completely cold and
switched off.
The appliance is equipped with a tilting grill
element that allows the upper part of the
oven cavity to be cleaned easily.
1. Slightly raise the roof heating element
and rotate the retaining latch by 90° in
order to release the heating element.
2. Carefully lower the heating element until
it stops.
Improper use
Risk of damage to the appliance
• Do not excessively flex the element
during cleaning.
3. When you have finished cleaning, place
the heating element back in position and
turn the retaining latch to lock it in place.
Cleaning and maintenance
4.5 Vapour Clean (on some models
only)
Vapour Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the inside of the oven very
easily. The dirt residues are
softened by the heat and water
vapour for easier removal
afterwards.
Improper use
Risk of damage to surfaces
• Remove from the inside of the oven any
food residues or large spills from
previous cooking operations.
• Carry out assisted oven cleaning
operations only when the oven is cold.
Preliminary operations
Before starting the Vapour Clean cycle:
• Completely remove all accessories from
inside the oven. The roof lining can be
left inside the oven.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents