Vapour Clean (On Some Models Only) - Smeg SFA106N Original Instructions Manual

4.5 Vapour clean (on some models
only)
Vapour Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the oven cavity very
easily. The dirt residues are
softened by the heat and water
vapour to make them easier to
remove.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the oven cavity.
• Carry out assisted oven cleaning
operations only when the oven is cold.
Preliminary operations
Before starting the Vapour Clean function:
• For Multifunction models: Completely
remove all accessories from inside the
oven.
• Remove the self-cleaning panels, if
present (see "Removing self-cleaning
panels and rack/tray support frames (on
some models only)").
• Pour approx. 40 cc of water onto the
floor of the oven. Make sure it does not
overflow out of the cavity.
Cleaning and maintenance
• For models with pizza stone: Remove
the accessories from inside the oven
cavity, apart from the rack/tray support
frames.
We recommend that you place the
cover in the housing on the bottom
of the oven cavity in place of the
pizza stone.
• Place a tray on the bottom shelf.
• Pour approximately 40 cc of water into
the tray. Make sure it does not overflow
from the tray.
37