System Setup: Advanced Menu - BenQ HT5550 User Manual

Hide thumbs Also See for HT5550:
Table of Contents

Advertisement

SYSTEM SETUP: ADVANCED menu

• Reset Lamp Timer: See
Lamp Settings
• Lamp Timer: See
• HDMI Range
Selects a suitable RGB color range to correct the color accuracy.
• CEC
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, turning on the HDMI CEC compatible device automatically turns on
HDMI
the projector, while turning off the projector automatically turns off the HDMI CEC
Settings
compatible device.
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, you can set the behavior of powering on/off between the device and
the projector.
Password
See
With the control keys on the projector and remote control locked, you can prevent
your projector settings from being changed accidentally (by children, for example).
When the Key Lock is on, no control keys on the projector will operate except
To release panel key lock, press and hold
Key Lock
remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in locked
status the next time it is turned on.
You can turn off the LED warning lights. This is to avoid any light disturbance when
LED Indicator
viewing images in a dark room.
Returns all settings to the factory preset values.
Reset All
Settings
The following settings will still remain: Picture Mode, User Mode Management, Brightness,
Contrast, Color, Tint, Sharpness, Advanced, Projector Position, LAN Settings, Source
Rename, and Password.
36
Menu operation
Getting to know the lamp hour on page
• Auto: Automatically selects a suitable color range for the incoming HDMI
signal.
• Full: Utilizes the Full range RGB 0-255.
• Limited: Utilizes the Limited range RGB 16-235.
Power On Link >
From Device
Power Off Link >
From Projector
Utilizing the password function on page 21.
POWER.
Resetting the lamp timer on page
When the connected device is turned on, the projector
will be activated, too.
When the projector is turned off, the connected device
will be shut down, too.
(the right key) on the projector or
43.
39.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents