Controls And Functions - BenQ HT5550 User Manual

Controls and functions

Projector & Remote control
All the key presses described in this document
are available on the remote control or projector.
1
2
3
2
8
5
6
3
9
4
10
10 Introduction
1. SOURCE
Displays the source selection bar.
2.
Toggles the projector between standby
mode and on.
Toggles the projector between standby
mode and on.
4
3. BACK
5
Goes back to previous OSD menu, exits and
6
saves menu settings.
7
4. MODE, PIC MODE
Selects an available picture setup mode
when the projector detects a valid signal.
5. Arrow keys ( ,
2
When the On-Screen Display (OSD) menu
11
is activated, these keys are used as
directional arrows to select the desired
12
menu items and to make adjustments.
13
Keystone keys ( /
Display the keystone correction page.
6. OK
Confirms the selected On-Screen Display
7
(OSD) menu item.
1
7. MENU
14
15
Turns on the On-Screen Display (OSD)
menu.
16
17
8. Keystone correction key
Displays the Keystone correction menu.
18
9. MOTION ENHANCER
19
Displays the Motion Enhancer 4K menu.
10. Picture quality adjustment keys (BRIGHT,
COLOR TEMP, GAMMA,
CONTRAST, COLOR MANAGE,
SHARP, DYNAMIC IRIS)
Display the menus for adjustments of the
appropriate picture quality values.
POWER
ON/ Off
, ,
,
)
/ )