Recording Shot Marks; Rec Review - Sony PMW-EX3 Operating Instructions Manual

Recording Shot Marks

When you record shot marks for important scenes
as subsidiary data, you can access the marked
points easily on a Shot Mark screen, which only
displays scenes with shot marks only. This
increases editing efficiency.
For the Shot Mark Screen, see "Displaying the
SHOT MARK Screen" on page 105.
The camcorder permits you to record two types of
shot marks: shot mark 1 and shot mark 2.
Shot marks can be recorded as needed during
recording or can be added after recording while
checking the playback pictures.
Inserting a shot mark during recording
Activate the IR Remote Commander (page 41),
and use the SHOTMARK 1 or 2 button.
SHOTMARK 1 button
SHOTMARK 2 button
Press the SHOTMARK 1 or 2 button where
you wish to insert a mark.
If the Shot Mark1 or Shot Mark2 function is
assigned to an assignable button, you can also use
it instead (page 75).
A shot mark of the type corresponding to the
button you press is recorded.
For operations to add shot marks after recording,
see "Adding shot marks during playback" on page
99 and "Adding/Deleting Shot Marks" on page 106.
74 Recording Shot Marks / Rec Review
PUSH SET
1 T
SHOTMARK ZOOM
2 W
THUMBNAIL SUB CLIP
PREV PLAY/PAUSE NEXT STOP
. u > x

Rec Review

You can review the last recorded clip on the
screen (Rec Review).
Use the REC REVIEW button on the supplied
lens or assign the Rec Review function to an
assignable button to use it instead (page 75).
CH -1
AU DIO CH -2
OU T
CO MP
ON EN
OU T T
After recording is finished, press the REC
REVIEW button or the assignable button to
which you assigned the Rec Review
function.
Playback of the specified block of the clip begins.
In Rec Review, the last 3 seconds, 10 seconds, or
the entire part of the clip is displayed, depending
on the "Rec Review" setting (page 119) of the
CAMERA SET menu. It is set to 3 seconds at the
factory.
Rec Review is terminated at the end of the clip,
resuming STBY (recording standby) status.
Notes
• If the duration of the last recorded clip is less
than the time (3 or 10 seconds) specified for Rec
Review, the clip is played back from the
beginning to the end.
• During Rec Review playback, only the STOP
button is valid.
When the STOP button is pressed, Rec Review
is canceled, and the camcorder returns to STBY
(recording standby) status.
REC REVIEW
button
HT
BR IG
ST
NT RA
CO
A
IN G ZE BR
PE AK
INF O
/BA TT
PL AY
DIS
IM AG E
MI RR OR
ON
OF F