Download Print this page

Section 4: Connecting To Tp-Link Using Android Or Ios Device Via Wi-Fi - TP-Link TL-MR3040 Instructions

Provisioning a portable router for xm360 x-tractor
Hide thumbs Also See for TL-MR3040:

Advertisement

A. In the system try, right click on the network icon and select Open Network and Sharing Center
B. In the left navigation bar, select Change adapter settings
C. Confirm that desired Wireless Network Connection is enabled and connected, and that any other
connection is Not Connected
D. Right click on Wireless Network Connection and select Properties (if User Account Control prompt
appears, click Yes to allow change)
E.
In the Wireless Network Connection Properties window in the Networking tab, select Internet
Protocol Version 4 (TCP/IPv4), then click the Properties button just below
F.
Confirm that both Obtain an IP address automatically and Obtain DNS server address
automatically are selected, and press OK
2. Open a web browser (such as Internet Explorer), and navigate to
3. When prompted, authenticate with:
Username: admin
This information can be found on the Default Settings sticker under the battery cover
If no prompt appears, confirm:
A. TP-Link has power and is turned on
B. PC Wi-Fi network adapter enabled and connected
C. No other network connections exist
D. No static IP set on PC
E.
TP-Link has been restored to factory defaults (as explained in Section 1)
4. Continue to Section 5 to provision TP-Link

Section 4: Connecting to TP-Link Using Android or iOS Device via Wi-Fi

1. On device, connect to TP-Link's Wi-Fi network
Name of network, as well as potential Wi-Fi password (TP-Link
version-dependent), can be found on the Default Settings
sticker under the battery cover
Confirm that connection has no static IP set
A. Go to device's Settings, then Wi-Fi (can be found under
Wireless & networks on Android)
B. Click on TP-Link's network
C. Select FORGET to remove any prior configurations for this
connection (as seen in Figures 7 & 8)
D. Reconnect to the TP-Link (after clicking FORGET, Android
will not reconnect automatically)
2. Open a web browser (such as Chrome (Android) or Safari (iOS)), and
navigate to
192.168.0.1
F
6: W
N
IGURE
INDOWS
ETWORK
Password: admin
C
- W
-F
ONNECTIONS
I
I
192.168.0.1
F
7: A
IGURE
W
-F
D
NDROID
I
I
ETAILS
Page 3 |
03/16

Advertisement

loading