Feature Mpls Traffic-Engineering - Cisco Nexus 7000 Series Command Reference Manual

feature mpls traffic-engineering

feature mpls traffic-engineering
To enable Multiprotocol Label Switching (MPLS) traffic engineering (TE) on the device, use the feature
mpls traffic-engineering command. To return to the default setting, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Per VDC
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines Unless you enable MPLS TE on the device, no TE commands are available.
The user has to enter feature command to enable TE.
This command requires the MPLS Services license.
Examples This example shows how to enable MPLS TE:
switch(config)# install feature-set mpls
switch(config)# feature-set mpls
switch(config)# feature mpls traffic-engineering
switch(config)#
Related Commands Command
interface tunnel-te
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
160
feature mpls traffic-engineering
no feature mpls traffic-engineering
Modification
This command was introduced.
Description
Configures the traffic-engineering (TE) interface.
F Commands
OL-24994-01