2. Using the E-7100 E-7100 Startup, Shutdown and Restart............A-11 To Start the Main Unit and the E-7100..............A-11 To Shut Down the Main Unit and the E-7100............A-11 To Shut Down the E-7100 only ................A-12 To Restart the E-7100..................A-12...
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Declaration of Conformity • Product Name: Color Controller • Model Number: E-7100 • Responsible party: Ricoh Americas Corporation • Address: 5 Dedrick Place, West Caldwell, NJ 07006 •...
Note to users in Canada Note: This Class B digital apparatus complies with Canadian ICES-003. Remarque concernant les utilisateurs au Canada Avertissement: Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Caution: Properly shielded and grounded cables and connectors must be used for connec- tions to host computer (and/or peripheral) in order to meet FCC emission limits.
Safety Information Read this Safety Information carefully before you use this product and keep it handy for future reference. When using this machine, the following safety precautions should always be fol- lowed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.
R CAUTION: • Protect the machine from dampness or wet weather, such as rain and snow. • Unplug the power cord from the wall outlet before you move the machine. • While moving the machine, you should take care that the power cord will not be damaged under the machine.
Please read this document before installing or using the Color Controller E-7100. Note ❒ Ricoh supplied and is responsible for all the material provided in this docu- ment. If you have questions regarding the material contained in this docu- ment, please contact Ricoh Americas Corporation.
Not used (Monitor port) Restart”. Network connector 10/100/1000Mbps Front side USB port Port for connecting the E-7100 to a LAN Port for installing system software, acti- Network connector 10/100/1000Mbps vating Fiery features, or printing from a prepared USB flash drive...
• Insert firmly the plug in the outlet. • Avoid using an outlet extension plug or cord. • Ground the E-7100. Avoid using a 3-prong adapter in a 2-hole ungrounded outlet. • Do not put anything on the power cord.
Getting Started Environment Environmental specifications Operating Ambient temperature 5 °C to 40°C (41 °F to 104 °F) Relative Humidity 10% to 85% (non condensing) Altitude 3048 m (10,000 FT)
• Turn off the main power. See p.11 “To Shut Down the Main Unit and the E-7100” or p.12 “To Shut Down the E-7100 only”. • Unplug the power cord from the wall outlet. When doing this, grip the plug so as not to stress the cord, reducing the risk of fire or electric shock.
Turn off the main power switch of the E-7100. Note ❒ Do not turn off the main power switch of the E-7100 when the power indi- cator is lit. Make sure the main power switch of the E-7100 is not lit before turning off the main power switch.
Press [Shut Down], and then press [OK]. Note ❒ Do not turn off the main power switch of the E-7100 when the power indi- cator is lit. Make sure the main power switch of the E-7100 is not lit, before turning off the main power switch.
Power Up Sequence Power Up Sequence The following sequence describes the E-7100 initial configuration. If system soft- ware is reinstalled, language, password, and Setup will need to be reconfigurated. BKH002S A-13...