Function List - Mitsubishi Electric NZ2GN2B1-32D User Manual

3.4

Function List

This section lists the functions of I/O modules.
: Available, : Not available
Item Description
Input response time setting Prevents an incorrect input due to noise by setting
function the response time required for the module to
recognize an actual input as the X signal.
Output HOLD/CLEAR Sets whether to hold or clear the last output value for
setting function the case when the I/O module is disconnected from
data link, or when the CPU module operating status
is STOP.
Output ON/OFF information Checks whether the output has been turned on or
hold function off.
Protection function The transistor output module and the I/O combined
module (transistor output part) have the overload
protection function and the overheat protection
function.
Module power supply Detects a voltage drop of the module power supply.
voltage drop detection
function
External power supply Monitors the ON/OFF status of the external power
monitoring function supply.
Function availability
Input Output I/O combined
module module module
  
  
  
  
  
  
Reference
Page 76 Input
Response Time
Setting Function
Page 77 Output
HOLD/CLEAR
Setting Function
Page 78 Output
ON/OFF
Information Hold
Function
Page 79 Protection
Function
Page 80 Module
Power Supply
Voltage Drop
Detection Function
Page 80 External
Power Supply
Monitoring
Function
3 SPECIFICATIONS
49
3.4 Function List
3