Terms; Generic Terms And Abbreviations - Mitsubishi Electric NZ2GN2B1-32D User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
Authentication Class
Cyclic transmission
Data link
Disconnection
Engineering tool
Link device
Link special register (SW)
Link special relay (SB)
Local station
Master station
Remote station
Reserved station
Return
RWr
RWw
RX
RY
Slave station
Transient transmission

GENERIC TERMS AND ABBREVIATIONS

Generic term and
abbreviation
A/D converter module
CC-Link IE TSN remote module
D/A converter module
Output module
I/O module
I/O combined module
Input module
10
Description
A group of modules and switching hubs compatible with CC-Link IE TSN, ranked according to the functions and
performance by the CC-Link Partner Association (www.cc-link.org). The I/O module is categorized as Authentication
Class B.
A function by which data are periodically exchanged among stations on the same network using link devices
Cyclic transmission, transient transmission
A process of stopping data link if a data link error occurs
A tool used for setting up programmable controllers, programming, debugging, and maintenance
A device in a module on CC-Link IE TSN
Word data that indicates the operating status and data link status of a module on CC-Link IE TSN
Bit data that indicates the operating status and data link status of a module on CC-Link IE TSN
A station that performs cyclic transmission and transient transmission with the master station and other local stations.
The station is controlled by programs in the CPU module or other equivalent modules on the station.
A station that controls the entire network. This station can perform cyclic transmission and transient transmission with all
stations. Only one master station can be used in a network.
A station that exchanges I/O signals (bit data) and I/O data (word data) with another station by cyclic transmission. This
station can perform transient transmission.
A station reserved for future use. This station is not actually connected, but counted as a connected station.
A process of restarting data link when a station recovers from an error
Remote register of link devices. RWr refers to word data input from a slave station to the master station (For some areas
in a local station, data are input in the opposite direction.)
Remote register of link devices. RWw refers to word data output from the master station to a slave station (For some
areas in a local station, data are output in the opposite direction.)
Remote input of link devices. Bit data input from a slave station to the master station (For some areas in a local station,
data are input in the opposite direction.)
Remote output of link devices. Bit data output from the master station to a slave station (For some areas in a local
station, data are output in the opposite direction.)
A station other than a master station: a local station, a remote station
A function of communication with another station, which is used when requested by a dedicated instruction or an
engineering tool
Description
A CC-Link IE TSN analog-digital converter module
An A/D converter module, a D/A converter module, an I/O module
A CC-Link IE TSN digital-analog converter module
A module where a digital signal can be output
A CC-Link IE TSN remote I/O module
A module where a digital signal can be input and output
A module where a digital signal can be input