Sony HANDYCAM DCR-PC106E Operation Manual page 47

FLASH LVL
Note that these settings will not function with external flashes that do not support
the following settings.
HIGH
GNORMAL
LOW
Note
b
• The setting returns to [NORMAL] when you disconnect the power source from your
camcorder for more than 5 minutes.
AUTO SHTR
GON
OFF
To make the flash (optional) level higher than normal.
To use the normal setting.
To make the flash (optional) level lower than normal.
Select to automatically activate the electronic shutter to adjust the
shutter speed when recording in bright conditions.
Select when recording without using the electronic shutter.
Customizing Your Camcorder
47