Additional Information; Using Your Camcorder Abroad; Usable Cassette Tapes - Sony HANDYCAM DCR-PC106E Operation Manual

Additional Information

Using your camcorder
abroad
Power supply
You can use your camcorder in any countries/
regions using the AC Adaptor supplied with
your camcorder within AC 100 V to 240 V,
50/60 Hz.
On TV color systems
Your camcorder is a PAL system-based
camcorder. If you want to view the playback
picture on a TV, it must be a PAL system-based
TV (see the following list) with the AUDIO/
VIDEO input jack.
System Used in
PAL Australia, Austria, Belgium,
China, Czech Republic, Denmark,
Finland, Germany, Holland, Hong
Kong, Hungary, Italy, Kuwait,
Malaysia, New Zealand, Norway,
Poland, Portugal, Singapore,
Slovak Republic, Spain, Sweden,
Switzerland, Thailand, United
Kingdom, etc.
PAL - M Brazil
PAL - N Argentina, Paraguay, Uruguay
SECAM Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine, etc.
NTSC Bahama Islands, Bolivia, Canada,
Central America, Chile, Colombia,
Ecuador, Guyana, Jamaica, Japan,
Korea, Mexico, Peru, Surinam,
Taiwan, the Philippines, the
U.S.A., Venezuela, etc.
Simple setting of clock by time
difference
You can easily set the clock to the local time by
setting a time difference when using your
camcorder abroad. Select [WORLD TIME] in
the (OTHERS) menu, then set the time
difference (p. 60).
Usable cassette
tapes
You can use the mini DV format cassette
only. Use a cassette with the
is a trademark.
Cassette Memory
There are 2 types of mini DV cassettes: those
with Cassette Memory and those without
Cassette Memory. Cassettes with Cassette
Memory have the (Cassette Memory)
mark. A cassette with Cassette Memory is
recommended for use on your camcorder.
is a trademark.
IC memory is mounted on this type of cassette.
Your camcorder can read and write data such as
dates of recording or titles from/to this memory.
The functions using the Cassette Memory
require successive signals recorded on the tape.
If the tape has a blank section at the beginning
or between recorded sections, titles may not be
displayed properly or the search functions may
not work properly.
To prevent a blank section from being
made on the tape
Touch [END SCH] to go to the end of the
recorded section before you begin the next
recording in the following cases:
– You have ejected the cassette during
recording.
– You have played back the tape.
– You have used the EDIT SEARCH function.
If there is a blank section or discontinuous
signals on your tape, re-record from the
beginning to the end of the tape as described
above.
b Note
• The Cassette Memory may not function correctly
when you record using a digital video camera
recorder that does not support Cassette Memory, on
a tape already recorded on using a Cassette Memory-
compatible digital video camera recorder.
Additional Information
mark.
,continued
83