Playing Back Still Images In Sequence - Photo Scan - Sony HANDYCAM DCR-PC106E Operation Manual

choosing the recording date on the screen. ([CM
SEARCH] is set to [ON] by default).
When you are using a cassette that does not
have Cassette Memory, your camcorder
searches the still image automatically regardless
of the recording date.
1
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
2
Press SEARCH M. on the Remote
Commander repeatedly to select
[PHOTO SEARCH].
3
Press . (previous)/> (next) on
the Remote Commander to select the
date or photo for playback.
When your cassette has Cassette Memory,
you can select the recorded date.
When your cassette does not have Cassette
Memory, your camcorder selects the still
image before and behind the current point
of the tape.
Playback of the photo starts automatically
at the selected scene.
To cancel the operation
Press STOP on the Remote Commander.
b Note
• Photo search will not function correctly when there
is a blank section between recorded sections on the
tape.
SEARCH M.
. / >
STOP
Playing back still images in
sequence – Photo scan
You can also locate still images one after
another and display each images for 5 seconds
automatically.
1
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
2
Press SEARCH M. on the Remote
Commander repeatedly to select
[PHOTO SCAN].
3
Press . (previous)/> (next) on
the Remote Commander.
Each photo will be played back for about 5
seconds.
To cancel the operation
Press STOP on the Remote Commander.
b Note
• Photo scan will not function correctly when there is
a blank section between recorded sections on the
tape.
SEARCH M.
. / >
STOP
43
Playback